7 Writing and editing a sequence program
－
35
－
Saving a sequence program in the PC
The sequence program saved in the controller may be saved and uploaded to a PC via HyperTerminal’s
transmission function.
The uploaded sequence program will then be saved to a specified file in text format.
Either one or all of the sequence programs can be uploaded at once.
1.
See section 7.3 “Starting and exiting HyperTerminal” on p.26, to connect the controller with
a PC and start HyperTerminal.
2.
Start a text editor.
3.
Create and save a new text file.
Add the “.txt” extension to the text file name. Do not make any entry to the file.
4.
Switch on the power to the controller.
The HyperTerminal screen will indicate that the controller has been started.
5.
Type in the upload command “UPLD” and press the Enter key.
A message appears, prompting you to select a sequence program (Select upload Sequence No. 0-31,
99, A).
Summary of Contents for EMP400 Series
Page 115: ......
