Oracle sparc M5-32, Installation Manual

Page: 26 / 182

16 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
When powering on the server for the first time, use the Oracle ILOM firmware
command-line interface to configure the server. After the initial configuration, use the
Oracle ILOM command-line or web interface for all additional maintenance and
administration tasks.
For information about the server-specific Oracle ILOM tasks, refer to Server
Administration . For information about Oracle ILOM tasks that are common to all
platforms managed by the firmware, refer to the Oracle ILOM documentation:
http://www.oracle.com/goto/ILOM/docs
Related Information
■
“SPs and SPPs” on page 10
■
“Physical Domains” on page 13
■
“Powering On the Server for the First Time” on page 141
■
Oracle ILOM documentation
(http://www.oracle.com/goto/ILOM/docs)
Oracle Solaris OS
The server is preinstalled with the Oracle Solaris OS. The Oracle Solaris OS provides
many utilities to help install and administer your applications.
Find information about the features of the OS, as well as links to technical reports
and training courses, at:
http://www.oracle.com/goto/Solaris11/
For information on installing and administering the OS, refer to the Oracle Solaris
11.1 documentation:
http://www.oracle.com/goto/Solaris11/docs
Related Information
■
Oracle Solaris 11.1 documentation
(http://docs.oracle.com/cd/E23824_01/)
■
Oracle University
(http://education.oracle.com)
■
“Power On the Server” on page 154
■
“Oracle Solaris OS Configuration Parameters” on page 156
■
“Additional Software Configuration and Testing” on page 157