41
11 MAINTENANCE
The device needs no lubrication and no periodic inspections. Points that require
lubrication are preserved at the factory. Parts of the device are powder coated.
Use general detergents to clean the device. Do not use solvents!
12 PACKAGE CONTENT
•
MasterPress 02
•
Support table
• Set of M10-55 bolts for assembling the table with MP 02 (4 pcs.)
• Carrying handles screwed into the device body (2 pcs.)
•
Power cord
• Magnetic stops (horizontal and vertical)
• Side tables (O pcs.)
•
Allen key 4 mm
OTHER ERRORS DISPLAYED ON CONTROL PANEL
MESSAGE DISPLAYED
(on control panel)
ERROR DESCRIPTION
No foil measurement
foil blocked
check foil sensor
unblock foil
No foil measurement - no foil or foil blocked.
Place foil or unblock foil.
Too much used foil
remove used foil
Too much foil wound: empty the winder reel.
Foil motor fault
contact service
Winder failure: contact the technical service.
No foil motor
connect motor
or reset foil value
No foil winder motor: connect the motor or set
“Foil” to “0”.
Slider drive fault 1(2)
contact service
Fault (1 or 2) of slider drive. Contact technical
service.
Not permitted
lift lever up
Operation not allowed with the lever lowered.
Raise the lever.
Moved to quick
recalibrate
move slower
Lever lowered too fast. Recalibrate and repeat
lowering the lever slower.
Calibration needed
see manual
Calibrate the mechanism: with the lever raised press
the down button and hold until procedure is
completed.
OPUS MasterPress 02
•
User guide
GB
Summary of Contents for MasterPress 02
Page 6: ...4 OPIS URZ DZENIA I AKCESORIA 6...
Page 22: ...22...
