31
6 CONTROL PANEL OPERATION
After turning the device on by means of the switch at the back of the housing, the control
panel displays for a few seconds information about the version of the installed control
program, heater temperature range and unit and the number of stampings performed
(Total Counter), and then the current settings and operating parameters of the device:
- heater temperature
- stamping force
- Stamping time
- Daily counter
- device status
- matrix position (requires calibation after every
Switching on and change of stamped material)
- foil winding rate
- program number
Control panel with display
Temp
Power
Timer
Pos/Calib
Foil
Count/Prog
OPUS MasterPress 02
•
User guide
GB
front bar
M10 bolts for fixing
the body
adjustable feet
rear bar
tabletop
Summary of Contents for MasterPress 02
Page 6: ...4 OPIS URZ DZENIA I AKCESORIA 6...
Page 22: ...22...
