optris Bottom-Up GIS 450i G7, Operator'S Manual

Page: 43 / 57

-
Operation 43
-
Furthermore, the amount of glass produced can be displayed in the
software. In this way, it is possible to see how much glass has been
produced in a linescan pass. This information can be found in the digital
display group.
It is also possible to get the value of the calculated glass area via the
analog output. In addition, the separately snapshots are saved after each
scan and can subsequently be evaluated in terms of temperature and the
produced glass area.
Figure 25: Digital display
group
Another component of the system is the remote control. With this unit the
shutters can be opened and closed again. During the first installation it is
necessary to align the devices. This can only be done when the shutters
are open.
When the system is powered, the yellow LED is on and the shutters are
closed. When the button is pressed, the shutters are opened and the LED
turns off.
Figure 26: Remote control