optris Bottom-Up GIS 450i G7, Operator'S Manual

Page: 34 / 57

-
34
-
After the installation the software can be opened. When using the camera for the first
time, the calibration files must be downloaded from the Internet. This happens
automatically, your PC hast to be connected to the internet. Alternatively, they can also
be downloaded from the USB stick.
3.2.3 Set up of the Software PIX Connect
The software starts with a so-called standard layout. There are two special predefined layouts included in the
software package. These are already customized for the glass system and contain all the necessary settings.
To load them, you must first import them from the stick into the software. In the menu, go to
Tools
→
Layouts
→
Layots import/export
→
Layouts import and select the two pre-configured layouts from the
stick.
The software already contains two predefined layouts called " BUGIS_Operation
”,
“
BUGIS_Demo
” and “
BUGIS_Setup
”. You can load these layouts in the menu under
Tools and
Load layout and use it as a presetting.
The layout named "
BUGIS_Setup " is used for aligning the cameras and BUGIS_Demo for demonstration
and is set to be used for temperatures from 0 to 250°C.
The layout named " BUGIS_Operation " has been configured for the actual glass measurement. Here the
temperature range of 150-900 °C is set.