Version 1.0.4 - 2020-09-08
28
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_3.
fm
Abb.3-2: Foundation plan
Drilled core holes with a diameter of 120 to 150mm and a depth of 200mm are provided in
the foundation.
Raise the machine from the floor and centre in the inner drill holes with the anchor screws.
Roughly align the machine.
Fill the drill holes with concrete and allow to set.
Aligning the machine
Place a machine spirit level (0.05mm/m) on the cross table.
Attach washers and nuts to the anchor screws.
Check the alignment of the milling machine with a machine spirit level on the cross table
and place base plates underneath the machine foot.
A
A
