Safety
Version 1.0.4 - 2020-09-08
15
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_1.
fm
1.9.5
Prohibition, warning and mandatory signs
INFORMATION
All warning and mandatory signs must be legible. They must be checked regularly.
1.10
Safety check
Check the milling machine at least once per shift. Inform the person responsible immediately of
any damage, defects or changes in the operating function.
Check all safety devices
at the beginning of each shift (when the machine is operated continuously),
once per day (during one-shift operation),
once per week (when operated occasionally),
after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the milling machine
are legible (clean them, if necessary)
and complete (replace them, if necessary).
INFORMATION
Organise the checks according to the following table;
General check
Equipment
Check
OK
Protective covers
Firmly bolted and not damaged
Signs, Markings
Installed and legible
Sight window
Check for mechanical damage (scratches, cracks)
Polycarbonate windows on page 14
Date:
Checked by (signature):
Functional check
Equipment
Check
OK
Emergency-stop
push button
After actuating an emergency stop push button the mil-
ling machine must be switched off.
Switch cabinet cooling
The cabinet cooling must be running.
Spindle guard
The spindle drive can only be switched on if the spindle
guard is in the machining position.
Date:
Checked by (signature):