Version 1.0.4 - 2020-09-08
60
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_5-
2.f
m
5.4.3
Cleaning the electrical cabinet
Although the electrical cabinet is con-
structed to shut off external air, foreign parti-
cles such as dust and dirt may enter the
cabinet when the door is open.
Accumulation of foreign particles on the
printed circuit boards or other electronic
components could cause machine malfunc-
tion.
Clean the inside of the electrical cabinet
regularly.
Remove dust inside electrical cabinet with a
vacuum cleaner. Do not use compressed air
to clean the electrical cabinet.
Never touch circuit boards or parts around
the connector. Also avoid hitting these parts
with the vacuum.
We recommend that the electrical cabinet is cleaned every 1000 operating hours.
5.4.4
Refilling the oil in the central lubrication system
The manual central lubrication system lubricates important functional parts of the milling
machine. The maximum fill amount is 1 litres.
Abb.5-2:
Central lubrication system
Filler hole
Pump lever
