Version 1.0.4 - 2020-09-08
26
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_3.
fm
3.4
Load suspension point
WARNING!
Before lifting the milling machine, check that all clamping screws of the milling table and
the spindle head are tightened.
The milling machine is lifted by eyebolt using a fork-lift truck or crane.
Screw the eyebolt included in the delivery into the milling head.
The clamping screws of the milling table and the spindle head bearing must be tightened.
Abb.3-1: Load suspension point
3.5
Set-up and assembly
3.5.1
Requirements regarding the installation site
Keep a work area of at least one metre around the machine free for operation and main-
tenance.
In order to achieve sufficient safety against falls by slipping, the accessible area in the mechani-
cal machining zone of the machine must be equipped with a slip resistance. The slip resistant
mat and/or the slip resistant floor must be at least R11 according to BGR 181. The determina-
tion of this requirement resulted in the risk assessment of the machine.
The used shoes must be suitable for being used in those machining areas. The accessible
areas must be cleaned.
Organise the working area around the milling machine machine according to the local safety
regulations.
Eyebolt
