Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
The update of the software of your Keratron
®
Scout is easy and does not alter your
database, or your instrument calibration, or your preferred settings that are stored in
the hard disk.
You must first uninstall the previous version, and then install the updated version of
“Keratron Scout Setup”. The most recent version can be also downloaded after
registration from the web Internet site of Optikon 2000:
http://www.optikon.com/
.
NOTE :
In Windows 2000 and XP operating systems, you must have system
administration (Administrator) privileges to install the software.
NOTE:
A printer has to be installed and set as default before running the
Scout.exe software
6.4.2 DOWNLOAD THE KERATRON SCOUT FROM THE WEB
Go to the Web site http://www.optikon.com/scoutmain.htm
The procedure is different depending on if you are registered or not.
IF YOU ARE NOT REGISTERED
•
Click the hyperlink “Go to the registration page”
•
Fill all the items, and click the “Register Me” button.
•
You will be enabled to download within 24 hours, receiving a confirmation e-
mail from Optikon 2000.
IF YOU ARE ALREADY REGISTERED
•
Click the hyperlink “Go to the download page”
•
When prompted, write your Username and Password, then click OK button.
•
Create an empty folder on your Hard-Disk (e.g. “C:\ScoutSW”)
•
Right-click on the hyperlink Setup.exe, choose “Save Target As” when
prompted and save it in the folder you have created.
Cod. 161204EN
6-8
2008-12-03 Rev.B