Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
Fig.4 – Handheld Configuration
It’s strongly suggested, after every move, to make a calibration, before the test.
NOTES:
When the battery is almost out of charge, a red led will turn on the display panel, and a random be-
beep will warn you that you still have a few minutes in order to download and save all the images, and
to put it back to charge, too. You should then remember to recharge the battery as soon as possible
(within days).
The red battery LED could turn of in case the battery had warmed up too much. In either case, you
should leave the instrument to rest in the Docking Base for a while.
When the VK with the Battery Module is not in use for about 90 seconds then, in order to spare the
batteries, a timeout circuit will turn off the cone lights and the display. The OD and OS LED will keep
blinking. To wake up back the VK after timeout, just press any key (i.e.: the OK button).
Cod. 161204EN
6-5
2008-12-03 Rev.B