Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
Fig.3 : Slit Lamp configuration: Docking Base cables connection
6.3.2 “PORTABLE” (BATTERY OPERATED) CONFIGURATION
For this configuration, referring to fig.4:
1. Insert the Battery Module (11) under the VK and screw the white knob until
the two parts do match tightly.
2. Insert the Headrest (12) on the top of the VK.
3. For a correct acquisition, follow the instructions in the paragraph “How to…
Acquire a good image in Portable configuration”
With the Battery Module, in particular:
1. Turn the VK on, by pressing the OK pushbutton for about 1 second. At this
point, you can acquire up to two images (8, with the memory expansion).
The numbered LED at the left side of the display panel show how many
pictures you have taken.
2. In order to download the images to the PC, insert the VK along with its
battery module into the Docking Base and then start “Acquire” “New
Image” at the PC. If you turn the base off while the VK is inserted, this will
turn it off too.
3. To reload the battery, you can leave the complete instrument, or the
battery module alone, at all time inserted in the base switched ON. The
normal complete charge time is about 15 hours, and that way the battery
can stay in its place at all times. If a fast charge was necessary, just push
the “fast charge” button. Removing shortly the battery, or switching off the
base (or a battery warm-up), will turn back the base to the normal charge.
Cod. 161204EN
6-4
2008-12-03 Rev.B