Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
9-5
2015-03-27
Rev.C
The configuration shown in Figure 9-3
is compatible with the “Factory Default”
(factory settings) of Keratron
™
Onda.
The address must be selected following specific rules and not randomly.
The configuration should be changed under the supervision of a network
administrator.
9.4.2
CONFIGURATION OF THE PC IN WINDOWS VISTA AND WINDOWS 7
In the case of Vista and Windows 7, the following is a possible configuration
sequence:
Start
→Control Panel → Display Network Status and Activity
At the end of the sequence, in the Sharing and network connections center window
select
hyperlink
Display Status
(1 in Figure 9-4) for the network selected for the
connection.
Figure 9-4: Sharing and network connection center
shows the connection status of the selected network.
