Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
9-1
2015-03-27
Rev.C
9
SOFTWARE KERATRON
™
SCOUT ON THE EXTERNAL
PC
9.1
INTRODUCTION
The Keratron
™
Scout software (i.e. S/W Scout) does not require special instructions
because it is driven by an appropriate program is usually installed when you receive
the system.
The following precautions are recommended:
1. The PC must support the 32-bit version of the operating systems of the
Windows
™
XP/Windows Vista
™
/Windows 7
™
program.
2. The screen properties can be set
in any mode, but it must be a “
true color
”
(65K or 16M colours). It is however recommended a screen size of at least
1024x768 pixels.
3. Do not alter any of the system files installed by the Keratron
™
Scout Setup
software, nor any file in the Database unless you have a specific
competence on the PC and LAN management. If such is the case, refer to
the Service Manual.
The update of the software of your Keratron
™
Scout is easy and does not alter your
database, or your instrument calibration, or the user settings that are stored in the
hard disk.
You must first uninstall the previous version, and then install the updated version of
Keratron
™
Scout Setup.
The most recent version can be downloaded, after you have registered, from the
website of Optikon 2000 S.p.A: http://www.optikon.com/.
NOTE :
You must have system administration (Administrator) privileges to install the
software.
NOTE:
A printer has to be installed and set as default before running the Scout.exe
software.
9.2
DOWNLOAD THE KERATRON
™
SCOUT FROM THE WEB
Go to the Web site http://www.optikon.com/scoutmain.htm
