Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
7-11
2015-03-27
Rev.C
create a film lasting approximately 1 second that is sent to the PC at the time of
each acquisition.
In the “Quality” section it is possible to choose the frequency and, therefore, the
size of the film to be sent to the external PC.
Figure 7-20: Topo-Aberrometry options folder
Furthermore, it is possible to configure several parameters for the image of the
patient’s refraction and for the scales used in the image of the
wavefront
and the
starting mode for the topo-
aberrometric acquisitions with ’”Auto RX” and/or
“Fogging” (see Section §7.6). We recommend keeping as default “Auto RX” and
“Auto RX turn off” active. The latter option prevents repeating the AutoRX when
more than one consecutive topo-aberrometric acquisition is carried out on the same
eye.
It is finally possible to pre-set if the pupil for which the patient's refraction is
calculated should be the last selected one or the photopic one (calculated from the
VL map).
In section
Print/Process
(Figure 7-) you can choose between the printers installed
and connected to the UBS port of the Keratron Onda, and set the text print mode
(only refractive and keratometric data) or graphic print mode (screen printing).
