Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
7-8
2015-03-27
Rev.C
7.3
SETTINGS
Selecting on
touchscreen
function
Settings
allows you to access a window that lists
which firmware and software versions are present on Keratron
™
Onda or configure
several options of the unit itself.
In the
About
folder, in addition to the
unit's serial number
,
you will find listed the
version and
checksum
of the software components of the user interface (Onda.exe
and Onda.dll). The same information is listed for the resident
firmware
in the unit’s
electronics. Optikon 2000 S.p.A. can be consulted as the software designer of all of
these applications.
Figure 7-15: Information on the About folder
After making any changes, the options can be confirmed by pressing the [OK]
button or they can be cancelled by pressing [Abort], which will return you to the
initial screen (Figure 7-1).
In the
General
(Figure 7-16) folder the appropriate cursors can be used to modify
the volume of the system’s loudspeaker (
Audio Volume Control
), the intensity of the
LCD’s backlighting (
Backlight LCD
) and the light intensity of the fixation target
(
Fixation Target
).
There are also three buttons that enable you to access the
touch screen
calibration
procedure, the motor diagnostics and change the date and time. This information
will be included in the PDF printouts.
