Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
9-6
2015-03-27
Rev.C
Figure 9-5: Connection status
of the selected network
Pressing the Properties button (1) allows you to access the protocols window (Figure
9-6). In the
Network
folder use the mouse to select
Internet Protocol version 4
(TCP/IPv4)
(1), then press
Properties
(2).
Figure 9-6: Network card protocols
The final window permits entry of the parameters necessary for communication. As
indicated in Figure 9-7, select (1)
Use the following IP address
and enter the
numbers shown in the Figure (2 and 3).
