Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
9-4
2015-03-27
Rev.C
Figure 9-2 shows an example of a network connection. In the General folder at point 1
select “Internet Protocol (TCP/IP)” and press button
Properties
(2).
Figure 9-2: Network card protocols
In the new window (Figure 9-3) it is possible to set the communication parameters.
Select “
Use the following IP address
” (1) and in fields
IP address
(2) and
Subnet
Mask
(3) enter the following configurations:
192.168.0.140
255.255.255.0
Figure 9-3: Protocol configuration
TCP/IP in Windows XP
NOTE:
