Opticon LG2 Series, Manual

Page: 50 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 42
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 43
Save Settings
6.3 - Handle Trigger Programming
Scan the following barcodes to set the handle trigger functionality:
Read with Both Imagers (Default) Read with Far-Field Imager ONLY
Read with Near-Field Imager ONLY Upload Stored Data
Handle Trigger Take Picture
Note: If you program a trigger to another function, you will need to reset any performance barcode setting
from Chapter 3.
6.4 - Save Settings on Reader
Scan the following code to save settings on reader:
Save Settings
After you assign one of the keys to take pictures you will need a software to transfer the images
to your PC. The Image Uploader software is free demonstration software available from Opticon
to demonstrate the image capture function of the LG2. Users accepts full responsibility for use
and must use as is.
6.5 - Image uploader software