Opticon LG2 Series, Manual

Page: 11 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 2
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 3
Save Settings
1.2 - Unpacking
Remove the imager from its packing and inspect it for damage. If the scanner was damaged
during shipping, please call Opticon at (800) 636-0090.
The standard LG2 unit is shipped with a USB cable interface. The unit also features a battery
blank that must be installed in the unit at all times.
Various accessories are available for the LG2.
• 3 cable options (USB, RS-232 or PS2)
• 1300 mA Lithium-Ion battery
• Class 1 Bluetooth radio with 300 foot operating range
• Clip-on pistol grip handle
• External battery charger
• CodeXML Bluetooth modem
Please keep your packing materials. The LG2 is shipped in an approved shipping container and
should be used if you ever need to return your equipment for servicing.
The LG2 utilizes digital camera technology to take a picture of a symbol. Once an image is captured,
the LG2 utilizes advanced decoding algorithms to extract data from the captured image.
The LG2 is available as a palm-held unit or users may purchase a clip-on pistol-grip handle.
The palm held unit features left and right triggers (figure 1.1). These triggers may be programmed to
perform various features. The reader is shipped with the left trigger and right trigger functioning as a
decode symbol command.
The clip-on pistol-grip handle features a trigger on the handle (figure 1.2). The two triggers on the top
of the unit also work when the handle is attached.
1.3 - Targeting and Reading Techniques
Note: The trigger on the handle attachment is light.
Squeezing to hard may damage the unit.
Figure 1.1
Figure 1.2