Opticon LG2 Series, Manual

Page: 22 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 14
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 15
Save Settings
Attaching and Switching Cables
The LG2 is available with USB (standard), RS-232 and PS2 cables. All of the cables are connected to
the LG2 with a 8-pin DIN connector. Different cables may be required for different hosts.
Palm Held LG2
To install a cable on the standard palm-held unit, correctly line up the 8-pin DIN connector (figure 2.11)
into back end of the unit. The arrows on the connector should be facing down. When they are lined up,
firmly push the cable in (figure 2.12). To unattach, you must pinch the plastic on the 8-pin DIN and pull
back to disengage the connector (figure 2.13).
LG2 with Attachable Handle
If you purchased the attachable handle accessory (see section 2.3 for handle attaching instructions),
the 8-pin DIN connection is at the botton of the handle. Insert 8-Pin connector (figure 2.14) and firmly
push cable into the handle (figure 2.15). To unattach, you must pinch the plastic on the 8-pin DIN and
pull back to disengage the connector (figure 2.16).
2.5 - Switching Cables
Figure 2.11
Figure 2.12
Figure 2.13
Figure 2.14
Figure 2.15
Figure 2.16