Opticon LG2 Series, Manual

Page: 61 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 52
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 53
Save Settings
Transfer Only Unsent Data in Memory Delete Scanned Data from Memory
Enable Auto Transfer Buffer Memory
(Default)
Disable Auto Transfer Buffer Memory
RS-232 Considerations
In RS-233 Cabled mode, the LG2 thinks it is always connected even though the serial cable is disconnected
or the power adapter is unplugged. Data scanned will be sent, regardless of connection status. Data
scanned in Cabled mode will be lost if the LG2 is not connected to the serial cable-it will not buffer the data.
Also, no log features work while the LG2 is in RS-232 cabled mode.
In RS-232 Batch mode, the LG2 will detect if it is connected to a powered serial cable, and will send the
data. If a powered serial cable is not connected or if the power adapter is not connected to the serial cable,
the LG2 will buffer the data. When the LG2 is then connected to a powered serial cable, the data will
automatically upload.
All log mode features work in RS-232 Batch mode.
RS-232 Batch (Default) RS-232 Cabled
8.1 - Batch Mode (con’t)
LG2 has a time stamp feature for logging data (The time stamp is defaulted off in shipped units). If you
enable the time stamp feature, everytime the LG2 is powered off or rebooted, the timer will stop.
A 8-digit number represents the time stamp. The format is ddhhmmss (dayday/hourhour/minuteminute/sec-
ondsseconds). Scan the following barcodes to turn the time-stamp on/off:
On Off (Default)
Note: The time stamp feature is in relative time from when the reader was last powered up.
8.2 - Time Stamp Settings
Note: Not applicable in “Log Only Mode”
use “Transfer All Data In Memory”.