Opticon LG2 Series, Manual

Page: 55 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 46
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 47
Save Settings
Scan the following barcodes to set delay time between scans:
0 Seconds (Default) 1 Second 3 Seconds
7.4.2 - Continous Scan - Trigger Delays
7.4 - Continous Scan
Scan the following barcodes to turn continous scanning on/off:
Both Near & Far Field On Near Field Only On
Far Field Only On Off (Default)
Note: This function is only reccommended for short term use because of battery consumption. See section
7.4.1 for Sleep Time Out Settings
Will only work in versions 2098 and above. Scan one of the codes below to set the amount of time a cabled
LG2 will operate in continous scan mode before entering sleep mode:
Cabled - 2 hours (Default) Cabled - Always
Scan one of the codes below to set the amount of time a uncabled LG2 will operate in continous scan
mode before entering sleep mode:
Uncabled - 5 minutes (Default) Uncabled - 15 Minutes Uncabled - 30 Minutes
Note: This fuction is only reccommended for short term use because of battery consumption.
7.4.1 - Continous Scan - Sleep Time Out