Opticon LG2 Series, Manual

Page: 33 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 24
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 25
Save Settings
4.1 - Introduction
The following chapter will allow a user to change the symbology settings on the LG2. To reset the unit to
factory defaults or to save the current settings please scan one of the barcodes below:
Save Settings Reset to USB Factory Defaults Clear All CodeXML Rules
Reset to PS2 Factory Defaults
Note: If you do not save your settings and the LG2 loses power you will lose your settings.
4.2 - Aztec Symbology
Scan the following codes to enable/disable Aztec symbology settings:
Aztec On Aztec Off (Default) Sample Aztec Code
4.3 - Codabar Symbology
Scan the following barcodes to enable/disable Codabar symbology settings:
Codabar On (Default) Codabar Off Sample Codabar
Not all settings will be
reset with this barcode.
Non-standard inks
and radio settings will not
be reset.
Not all settings will be
reset with this code.
Non-standard inks
and radio settings will not
be reset.