Kiosk Manager’s Guide: 20 Series
1/14/2022
V1.01
|
Pg. 16
Install Printer Paper
When your kiosk’s printer runs out of paper, it’s easy to replace. Remove the empty
spool and follow these simple instructions with a new roll:
•
Keep the roll tightly wound
•
With the printer powered on, position the roll in the paper tray so the paper
feeds up from the back and push the paper into the gap circled in red (shown
below) – the printer will automatically pull the paper through and feed a few
inches out the front
•
Tear off the excess paper from the front of the dispenser and your kiosk is
ready to print (you will never have to replace ink for this thermal printer)
Reload the Lock Dispenser
Keep extra locks on hand so you’ll be ready to reload as needed. Locks must fit
comfortably in the vending coils. If you repackage locks to fit, do that first and
be
sure the boxes are taped shut
(to avoid having the keys fall out and end up in the
bottom of the kiosk).
Tip
to order printer paper directly from OpenTech. A regular roll is 200 feet, which can print a
lot of receipts, but if you make it a practice to reorder when you only have one roll left and you’ll
never have to worry about running out or paying for expedited shipping.
