Opel 1900 1973, Service Manual

Page: 139 / 625

1973 OPEL SERVICE MANUAL
2. Remove door lock knob.
3. Remove door inside handle.
4. Adjust sash window so that the main lever with
toothed segment are in alignment with the front re-
taining plate. See Figure
Figure Aligning Main Lever With Front Retaining
5. On Models 57, and scribe position of
screw at the plastic support of window rail and
6. Block sash window in door interior.
7. Scribe position of window lifter guide rail screws.
See Figure
10.
Figure Guide Rail Screws
8. Unscrew window lifter and let it down slowly.
9. Slide window upwards and block it.
10. Remove window lifter through opening in inner
door panel upper part. See Figure
Figure 1 Removing Window Lifter
Installation
1. Install window lifter through opening in inner
door panel tipper part. See Figure
2. Block window upwards.
3. Secure window lifter.
4. On Models 57 and secure plastic support of
window rail.
5. Install inside door handle.
6. Install door lock knob.
7. Install door trim pad.
REMOVAL AND INSTALLATION OF FRONT DOOR
LOCK
Removal
1. Remove door trim pad.
2.
Remove door lock knob.
3. Remove door inside handle.
4. On lock side, scribe position of guide rail bolt,
unscrew bolt, push guide rail downwards, and
remove it through access hole. See Figure
5. Remove door lock and install new one. See Figure