![background image](http://html.mh-extra.com/html/omron/zs-mdc/zs-mdc_user-manual_1633388070.webp)
4-14
Sect
ion 4
APPLICATION SETTING EX
AMPLE
S
ZS-MDC
User’s Manual
Section 4
Measuring the Twist of a Workpiece
Measuring the Twist of a Workpiece
This is an example of how to measure the height at 4 locations on a workpiece, and
calculate the difference (twist) between each of the measured values. Use [X-Y] for the
expression.
For details on how to connect and install the Sensor Heads and Sensor Controllers, refer to the “ZS-L
User’s Manual”.
FUN Mode-[SENSING]-[SEL CH]
1.
Assign the CH No. of the controller to inputs
A to C to be used for the expression.
INPUT A:1CH
INPUT B:2CH
INPUT C:3CH
CH0
CH1
CH2
CH3
CH4
Input A
Input B
Input C
Input A Input B Input C
Input D
Input D
The operation and/or measurement results are output
as judgement output or linear output.
▲
1
INPUT A
3
INPUT C
2
INPUT B
Summary of Contents for ZS-MDC
Page 12: ...10 Introduction ZS MDC User s Manual Introduction Editor s Note MEMO ...
Page 24: ...1 10 Section 1 FEATURES ZS MDC User s Manual Section 1 Part Names and Functions MEMO ...
Page 56: ...3 18 Section 3 SETUP ZS MDC User s Manual Section 3 Setting I O Assignments MEMO ...
Page 91: ...5 15 ZS MDC User s Manual Section 5 APPENDIX Section 5 Index MEMO ...