![background image](http://html.mh-extra.com/html/omron/zs-mdc/zs-mdc_user-manual_1633388018.webp)
1-4
Sec
tion 1
FEAT
UR
ES
ZS-MDC
User’s Manual
Section 1
Multi-Controller Applications
Multi-Controller Applications
●
Measurement of Workpiece Thickness at Multiple Locations
Sensor Heads can be placed so as to sandwich the workpiece and measure its thick-
ness. Logic operations can be performed not only on one location but on multiple loca-
tions to calculate the difference in the measurement result.
●
Measurement of Stepped Workpieces
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure steps in stepped workpieces.
●
Measurement of Average Workpiece Height
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure the average height of workpieces.
Summary of Contents for ZS-MDC
Page 12: ...10 Introduction ZS MDC User s Manual Introduction Editor s Note MEMO ...
Page 24: ...1 10 Section 1 FEATURES ZS MDC User s Manual Section 1 Part Names and Functions MEMO ...
Page 56: ...3 18 Section 3 SETUP ZS MDC User s Manual Section 3 Setting I O Assignments MEMO ...
Page 91: ...5 15 ZS MDC User s Manual Section 5 APPENDIX Section 5 Index MEMO ...