![background image](http://html.mh-extra.com/html/omron/zs-mdc/zs-mdc_user-manual_1633388029.webp)
Sect
io
n 2
INSTA
L
LATION &
CONN
ECTION
Section 2
Multi-Controller
2-5
ZS-MDC
User’s Manual
■
Installing on the DIN track
The following describes how to attach the 35 mm wide DIN track by quick, easy opera-
tion.
●
Installation procedure
The following describes how to install the Multi-Controller and Sensor Controller on the
DIN track.
1.
Hook the connector end of the Sensor
Controller onto the DIN track.
2.
Push the Multi-Controller down onto the
DIN track until the hook on the I/O cable
side is locked.
Push down until you hear it snap into
place.
Always hook the connector end of the Multi-Controller on the DIN track first. Hooking the I/O cable
end on the DIN track first may impair the mounting strength of the DIN track attachment.
DIN track (sold sepa-
rately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
End plate (sold separately)
PFP-M
Hook on connector
Hook on I/O cable
Summary of Contents for ZS-MDC
Page 12: ...10 Introduction ZS MDC User s Manual Introduction Editor s Note MEMO ...
Page 24: ...1 10 Section 1 FEATURES ZS MDC User s Manual Section 1 Part Names and Functions MEMO ...
Page 56: ...3 18 Section 3 SETUP ZS MDC User s Manual Section 3 Setting I O Assignments MEMO ...
Page 91: ...5 15 ZS MDC User s Manual Section 5 APPENDIX Section 5 Index MEMO ...