![background image](http://html.mh-extra.com/html/omron/zs-mdc/zs-mdc_user-manual_1633388080.webp)
5-4
Section 5
APP
E
NDIX
ZS-MDC
User’s Manual
Section 5
Q&A
Q&A
Question
Answer
When scaling is executed, an error appears and
settings cannot be made.
Scaling cannot be set for one of the following reasons:
• Scaling has been attempted when the measured value is
outside the measuring range.
• When two-point scaling has been executed, the distance
between the measured values for the two points is not 1%
or more of the rated measuring range.
When focusing is executed, an error appears and
settings cannot be made.
Monitor focus settings cannot be made when the distance
between the two specified points is not 1% or more of the
rated measuring range.
Summary of Contents for ZS-MDC
Page 12: ...10 Introduction ZS MDC User s Manual Introduction Editor s Note MEMO ...
Page 24: ...1 10 Section 1 FEATURES ZS MDC User s Manual Section 1 Part Names and Functions MEMO ...
Page 56: ...3 18 Section 3 SETUP ZS MDC User s Manual Section 3 Setting I O Assignments MEMO ...
Page 91: ...5 15 ZS MDC User s Manual Section 5 APPENDIX Section 5 Index MEMO ...