![background image](http://html1.mh-extra.com/html/omron/ws02-nctc1-e-07-2001/ws02-nctc1-e-07-2001_operation-manual_744249033.webp)
22
Basic Operations
Section 2-3
Shortcut keys are allocated to some functions. These allocations are dis-
played on the right side of the menu. For example,
New
can be selected by
pressing the
Ctrl
+
N
Keys (i.e., by pressing the
N
Key while holding down the
Ctrl
Key).
If the menu is displayed,
New
can also be selected by pressing the
N
Key (i.e.,
the underlined letter).
2-3-5
Moving and Copying NC Unit Data
NC Unit data, such as parameters, sequences, and speeds, can be moved to
other NC Units in the same project in units of NC Units either using drag-and-
drop or by using the
Cut
and
Paste
commands. Data can also be copied
using the
Copy
and
Paste
commands.
Moving NC Unit Data
NC Unit data can be moved between CPU Units of the same series. The fol-
lowing example shows how to move the data for NC2 on PC1 to PC2.
Either of the following 2 methods can be used.