![background image](http://html1.mh-extra.com/html/omron/ws02-nctc1-e-07-2001/ws02-nctc1-e-07-2001_operation-manual_744249057.webp)
46
Overview
Section 4-1
either hexadecimal or decimal format depending on the setting of the display
format.
Notes
1.
Settings can be entered and displayed in either hexadecimal or decimal
format depending on the setting of the display format.
2.
When the displayed value’s set unit is
Pulse
. When the set unit is
mm
or
inches
and the pulse rate is set to other than
1
, the value displayed will
change.
3.
The speeds set above can be set as interpolation speeds. However, make
sure that the maximum speed of individual axes does not exceed
500,000 (pps) or the maximum speed set in the parameter settings.
Acceleration/Deceleration
(X/Y/Z/U Axes: #1 to #9)
Only the X-axis settings are used for the CS1W-NC113/133 and CJ1W-
NC113/133, and only the X- and Y-axis settings are used for the CS1W-
NC213/233 and CJ1W-NC213/233. Settings can be entered and displayed in
either hexadecimal or decimal format depending on the setting of the display
format.
Note
Settings can be entered and displayed in either hexadecimal or decimal for-
mat depending on the setting of the display format.
Dwell Time (X/Y/Z/U Axes:
#1 to #19)
Only the X-axis settings are used for the CS1W-NC113/133 and CJ1W-
NC113/133, and only the X- and Y-axis settings are used for the CS1W-
NC213/233 and CJ1W-NC213/233. Settings can be entered and displayed in
either hexadecimal or decimal format depending on the setting of the display
format.
Note
Settings can be entered and displayed in either hexadecimal or decimal for-
mat depending on the setting of the display format.
Zone (X/Y/Z/U Axes: Zone
0 to Zone 2)
Only the X-axis settings are used for the CS1W-NC113/133 and CJ1W-
NC113/133, and only the X- and Y-axis settings are used for the CS1W-
NC213/233 and CJ1W-NC213/233. Settings can be entered and displayed in
either hexadecimal or decimal format depending on the setting of the display
format.
Note
1.
Settings can be entered and displayed in either hexadecimal or decimal
format depending on the setting of the display format.
2.
When the displayed value’s set unit is
Pulse
. When the set unit is
mm
or
inches
and the pulse rate is set to other than
1
, the value displayed will
change to specified set value
×
Pulse Rate
.
Item
Setting range
Speed (See notes 1
and 2.)
00000000 to 000F4240 Hex (0 to 1,000,000) (pps)
Item
Setting range
Acceleration
(See note.)
00000000 to 0003D090 Hex (0 to 250,000) (ms)
Deceleration
(See note.)
00000000 to 0003D090 Hex (0 to 250,000) (ms)
Item
Setting range
Dwell time (See
note.)
0000 to 03E7 Hex (0.00 to 9.99) (s)
Item
Setting range
Zone (See notes 1
and 2.)
C0000001 to 3FFFFFFF Hex (
±
1,073,741,823) (pulses)