![background image](http://html1.mh-extra.com/html/omron/ws02-nctc1-e-07-2001/ws02-nctc1-e-07-2001_operation-manual_744249058.webp)
47
Setting Editing Screens
Section 4-2
4-2
Setting Editing Screens
Use the following procedures to display the screen shown below.
To create a new project:
• Select
File(F)/New
; or
• Press the
Ctrl+N
Keys; or
• Select the
New Project
Icon from the toolbar.
To select an existing project:
• Select
File(F)/Open
; or
• Press the
Ctrl+O
Keys; or
• Select the
Open
Icon from the toolbar.
Note
Refer to
SECTION 5 Saving and Reading Projects
for information on opening
an existing project
Example: The following screen will be displayed after creating a new project
4-2-1
Displaying Setting Editing Screens
Use the following procedures to display individual Setting Editing Screens in
project window.
To Display Individual
Setting Editing
Screens
With the project tree displayed, select the settings to be displayed for the
specified NC, and either double-click or press the
Enter
Key.
X- and Y-axis editing screens will be displayed for 2-axis NC Units; X-, Y-, Z-
and U-axis editing screens will be displayed for 4-axis NC Units
To Display the Parameter
Editing Screen
1,2,3...
1.
Under the NC on the project tree, either double-click
Edit NC Parameters
,
or select it and press the
Enter
Key.