![background image](http://html1.mh-extra.com/html/omron/v680-d1kp52mt/v680-d1kp52mt_user-manual_741386005.webp)
3
RFID System
User's Manual
In
Be sure to observe the following precautions to ensure safe use of the Products.
1. Do not use the Products in environments with flammable, explosive, or corrosive gasses.
2. Do not attempt to disassemble, repair, or modify any Product.
3. Tighten mounting screws securely.
4. Do not allow water or pieces of wire to enter from openings in the case. Doing so may cause fire or
electric shock.
5. Turn OFF the Controller power supply before mounting or removing an Antenna or Amplifier.
6. Turn OFF the power supply to the Controller before changing settings.
Attach a Setting switch protection Cover after setting Switch.
7. If an error is detected in any Product, immediately stop operation and turn OFF the power supply. Consult
with an OMRON representative.
8. Dispose of the Products as industrial waste.
9. Observe all warnings and precautions given in the body of this manual.
10. Do not install the Products near equipment that generates a large amount of heat, such as a heater,
transformer, or high-capacity resistor.
11. Because a cable has a locking mechanism, make sure that it has been locked before using the cable.
12. Do not open the back cover of the V680-H01-V2 antenna.
13. Do not touch the product immediately after usage at high temperatures. Doing so may occasionally result
in burning.
14. When using a V680-D1KP58HTN, Make sure that the split pin is installed correctly to prevent the product
from becoming detached.
Precautions for Safe Use