![background image](http://html1.mh-extra.com/html/omron/v680-d1kp52mt/v680-d1kp52mt_user-manual_741386070.webp)
68
Sec
Ins
ta
lling Ante
nna
s
RFID System
User's Manual
Section 4
Installation
Connecting and Disconnecting Relay Cables
Mounting the Antenna
Removing the Antenna
When loosening the connection ring, always hold the flat surfaces on the Antenna connector with a wrench. If the con-
nection ring is loosened without holding the Antenna connector, the relay cable may be damaged or wire inside the relay
cable may break.
The connector cannot be pulled out without first loosening the connection ring. Completely loosen the connection ring
before pulling out the connector. Pulling on the cable without sufficiently loosening the connection ring may cause the
cable to be damaged or wire inside the cable may break.
1.
Align the key on the relay cable connector
with the key slot on the Antenna connector
and push the connector all the way in.
2.
Hold the flat surfaces on the Antenna connector
with a wrench, and turn the connection ring clock-
wise to secure the connector
1.
Hold the flat surfaces on the Antenna con-
nector with a wrench, and turn the connec-
tion ring counterclockwise to loosen the
connector.
2.
Make sure that the connection ring is sufficiently
loose, and then pull the connector straight out.
Antenna connector
Relay cable connector
Key
Key ditch
Connection rin
Flat surface
Connection ring
Flat surface
Antenna connector
Relay cable connector