75
RFID System
User's Manual
Sec
Ins
ta
lling RF Tags
Installation
Installing RF Tags
V680-D1KP52MT
RF Tag Installation Direction
Mount RF Tags as shown in the diagram on the right.
Please select the adhesive matched to the bonded material.
And defend decided dosage and usage. And confirm and use
the tidy fixation.
Because the material of RF Tag is PPS resin, the epoxy-
based adhesives are recommended to bonding to the metal
and the rigid plastic.
The epoxy adhesives listed in the following table are recom-
mended for the given temperature ranges.
When embedding the V680-D1KP52MT into a metal surface, use the V680-HS51/-HS52 Antenna.
Transmission will not be possible if the V680-HS63 Antenna is used.
Differences in Surrounding Metals
Communications distances are affected by the type of metal in back of or surrounding the RF Tag, as
shown in the following table.
The values for steel are set to 100%
Mutual Interference with RF Tags (Reference)
Provide the mounting distances indicated below to prevent malfunctions due to mutual interference
when using more than one RF Tag.
Ambient operat-
ing temperature
Product name
Manufacturer
-40 to 70
°
C
Two-part Epoxy-com-
pound Resin:
TB2001 (main agent)/
TB2105C (curing agent)
Three Bond Co.,
Ltd.
One-part Moisture-cur-
ing Elastic Adhesive
TB1530
Three Bond Co.,
Ltd.
-40 to 150
°
C
One-part Epoxy Resin:
TB2285
Three Bond Co.,
Ltd.
Two-part Epoxy Resin:
TB2087
Three Bond Co.,
Ltd.
Steel
SUS
Brass
Aluminum
V680-D1KP52MT
100%
85% to 90%
80% to 85%
80% to 85%
R0.2 max.
8.1
+0.1
0
5
+0.1
0
V680-D1KP52MT
Marked side
Marked side
V680-
D1KP52M
T
JA
PAN
dia.
25 mm min.
25 mm min.