![background image](http://html1.mh-extra.com/html/omron/v680-d1kp52mt/v680-d1kp52mt_user-manual_741386026.webp)
24
Sec
Antennas w
ith Buil
t-in Ampli
fie
r
RFID System
User's Manual
Section 2
Specifications and Performance
Setting Switch
Set SW1-1 on the V680-H01-V2 Antenna and the Controller as shown in the following table.
When the V680-CA1D/-CA2D is used, set SW1-1 of the antenna to turning on.
When using it excluding the V680-CA1D/-CA2D, set SW1-1 of the antenna to turning off besides.
Differences between the V680-H01 and the V680-H01-V2
As shown in the following table, the V680-H01-V2 supports additional maintenance functions.
Turn ON SW1-1(Antenna) when using the V680-CA1D/CA2D.
Only when the V680-D1KP58HTN is used, it is possible to set it.
Setting
Function
Default setting
SW1-1
Controller selection
OFF:V680-CA5D01-V
@
, CS1W-V680C11, or CJ1W-V680C11
ON: V680-CA1D/-CA2D
See Note.
OFF
SW1-2
RF Tag selection
OFF:V680-D1KP
@@
(EEPEOM RF Tags)
ON: V680-D
@
KF
@@
(FRAM RF Tags)
OFF
SW1-3
Reserved by System (Always set this Switch to OFF.)
---
SW1-4
Reserved by System (Always set this Switch to OFF.)
---
Note: Only when the V680-D1KP58HTN is used, it is possible to connect it with the V680-CA1D/-CA2D.
When the V680-CA5D01-V
@
, CS1W-V680-C11 and CJ1W-V680C11 is used, set SW1-1 of the antenna to turning off.
Antenna setting
Controller setting
V680-H01-V2
V680-CA5D01-V@
CS1W-V680C11
CJ1W-V680C11
V680-CA1D
V680-CA2D
SW1-1: OFF
SW4-8: OFF
D 100
×
m+3=0000
SW1-1: ON
SW4-8: ON
See Note.
D 100
×
m+3=0001
See Note.
Å@See Note.
: Cannot be used.
: Can be used.(Controller setting not required.)
Note: The high-speed mode cannot be used by the controller's setting.
display functions
V680-H01-V2
V680-H01
SW1-1: OFF
SW1-1: ON
no switch
Communication Test Mode
OK
OK
OK
Noise Level Measurement
Mode
OK
NO
NO
Distance Level Measurement
Mode
OK
NO
NO
Speed Level Measurement
Mode
OK
NO
NO
Communications Success
Rate Measurement Mode
OK
NO
NO
Setting switch protection cover
Note: Please attach a setting switch protection cover after setting switch.