INamp V1.4 - ASSEMBLY GUIDE Rev. Jun 2019
THANKS FOR CHOOSING ONE OF OUR KITS!
This manual has been written taking into account the common issues that we often find people
experience in our workshops. The order in which the components are placed on the board is meant to
make assembly as easy as possible.
Some steps are not obvious, so even if you're an experienced DIYer please read the steps thoroughly
before starting.
If this is your first project, please read this article before you start assembling the kit:
This project has one main board and two control ones. Control boards are identical so you will need to
follow the instructions twice.
GOOD LUCK!
MAIN PCB
OPEN MAIN BOARD BAG A
RESISTORS
Qty Value Code
Name on PCB
2
100k
Brown, Black, Black, Orange, Brown
R2, R8
3
1k
Brown, Black, Black, Brown, Brown
R4, R9, R10
2
10k
Brown, Black, Black, Red, Brown
R1, R7
2
220k
Red, Red, Black,Orange, Brown
R3, R6
FERRITE
Solder the two ferrite beads by using a recycled resistor leg passed through each ferrite and proceed as
if it were a resistor. Ferrite beads don't have polarity.
Qty Name on PCB
2
F1, F2
DIODES
Solder the diodes
observing their polarity
. The black or white line on the diode must match with the
white line on the diode symbol on the PCB silkscreen.
Qty Value
Name on PCB
2
1N5817
D1, D2
1
