4-2
Section
Installing Sensors
50
4-2-4 Interference with Proximity Sensors
V600 Sensors use electromagnetic coupling method (frequency: 530 kHz), so,
if they are installed near sensors (such as proximity sensors) with an oscillation
frequency of 400 to 600 kHz, it may cause the sensors to malfunction. Before
installing Sensors, and when selecting sensors, be sure to conduct tests to
make sure that there will be no interference.
The interference range will vary depending on the relative positions of the prox-
imity sensor and the Sensor. Be sure to install them at least as far apart as shown
in the following diagram.
Proximity
sensor
100 mm min.
V600-HS51
Proximity
sensor
Proximity
sensor
150 mm min.
200 mm min.
Be sure to install the Sensor and proximity sensor at least as far apart as shown
in the following diagram.
Proximity
sensor
100 mm min.
V600-HS61
Proximity
sensor
Proximity
sensor
100 mm min.
100 mm min.
V600-HS61
V600-HS51
V600-HS61