Appendix D
Conformity to Standards
88
Nomenclature
Read/Write Head Amplifiers
V600-HAM42-DRT Series
V600-HAM42-DRT-
-
1
2
3 4
1: Inductive identification system
2: Read/Write Head Amplifier - DeviceNet interface
3: Blank - First version
4: Blank - Standard model
Read/Write Head Sensor
V600-HS63
1
2 3
1: Inductive identification system
2: Read/Write Head Sensor
3: Square type
Data Carriers
V600-D
-
1
2 3 4 5 6
1: Inductive identification system
2: Data Carrier
3: Memory capacity
-2K 2 Kbytes
-8K 8 Kbytes
-23 256 bytes
4: Memory type
-R
SRAM
-P
EEPROM
5: Serial number
6: Blank
-Standard model
Suffix(es)
-For marketing purposes
FCC (Federal Communications Commission)
FCC Part 15 Subpart B
For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar
statement placed in a prominent location in the text of the manual:
Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a resi-
dential area is likely to cause harmful interference in which case the user will be required to correct the inter-
ference at his own expense.