2-1
Section
Amplifiers
13
2-1-2 Specifications
General Specifications
Item
Specifications
Number of Master words
Input: 2; output: 2 (total: 4 words)
Number of Sensor
connections
1 channel
Communications power
supply voltage
11 to 25 VDC (provided from communications
connector)
Internal circuit power supply
voltage
18 to 26.4 VDC
Internal current consumption
Communications power supply: 40 mA max.
Internal circuit power supply: 150 mA max.
Noise immunity
Internal circuit power supply normal
±
600 V
Internal circuit power supply common:
±
1,500 V
Dielectric strength
50/60 Hz at 500 VAC for 1 minute; leakage current
10 mA max.
Vibration resistance
10 to 55 Hz, 1.5-mm amplitude, with 4 sweeps of 8
min each in 3 directions
Shock resistance
294 m/s
2
(approx. 30G), 6 times each in 3 directions
Ambient temperature
Operating: 0
°
C to 55
°
C (with no icing)
Storage:
–25
°
C to 65
°
C
Ambient humidity
Operating: 35% to 85% (with no condensation)
Degree of protection
IEC60529 IP20 (built-in structure)
Mounting method
DIN track or direct mounting using accessory fittings
(M4 screws)
External dimensions
65
65
60 (mm)
Weight
Approx. 150 g
Applicable Sensors
Model
V600-HS51
V600-HS61
V600-HS63
V600-HS67
Applicable Standards
Standards
EN50081-2
EN50082-2
Note These standards apply to the EMC regulations in the EC Directives when the
V600-HS63 Sensor (2m) is used.
2-1-3 I/O Specifications
The V600-HAM42-DRT occupies 32 input bits (2 words) and 32 output bits (2
words) of the Programmable Controller. The particular words occupied (word X
and word Y) vary according to the Master (model and operating mode) and the
node number set by the V600-HAM42-DRT DIP switch.