5-3
Section
STEP 1 Starting
71
5-3
STEP 1 Starting
Procedure
1
Be sure that the basic V530-R150 components have been
connected correctly.
→
2
Turn ON the power supply on the monitor.
3
Turn ON the power supply on the V530-R150.
A startup message appears followed by a processing mes-
sage. After a short pause, the initial screen appears. The fol-
lowing screen appears the first time power is turned ON.
Note Never input the reset signal or turn OFF the power when startup
messages are displayed. Data may be lost, and the V530-R150
may not operate properly the next time it is started.
4
Be sure that the 2-dimensional code is correctly displayed
within the field of vision on the monitor.