6-2
Section
SET (Setting) Mode
114
1
Select the symbol color.
Black
Black symbol printed on white base.
White
White symbol printed on black base.
2
Select whether Right & Left Reverse of Data Matrix codes is
necessary.
ON
Necessary
For reading an image after reflection, or through the
back of a transparent material such as glass.
OFF
Unnecessary (Default setting)
For normal reading (from the front of the object).
3
Select the matrix size of codes.
(10 x 10 to 26 x 26; Default setting:10 x 10)
4
Set the black and white density level. (Level: 1 to 127; De-
fault setting: 32.) Set to 32 under normal conditions.
Set the density higher when the reflection ratio of black and
white is high and set it lower when the ratio is low.
5
Select the number of retries to be made if the reading is NG.
(0 to 9; Default setting: 0.)
6
Input the length of finder patterns (L-shape) in pixels.
(50 to 480, Default setting: 100)
A function to measure L-shape length automatically is avail-
able.
When setting reading conditions for the first time, be sure to
use this function.
→
7
Select the BGS level to search for finder patterns (L-shape).
(Weak/Middle/Strong; Default setting:Weak)