6-5
Section
System
147
4
Select the number for scene data and image data.
•
Scene No.
(0 to 9)
•
Image Data
(Memory 0 to 23,
Image 0 to 1)
5
Select
Execute when the confirmation message is dis-
played.
(e.g.) When saving system data:
Operation Examples for Personal Computers
This section describes data transfer using the Hyper Terminal
provided on Windows95/98 and Windows NT4.0 computers. In
this example, a RS-232C cable is connected to the COM1 port of
the computer. Alter the example to suit your communications
software or COM port number.
Data transfer is performed with XMODEM (-CRC or -SUM) pro-
tocol method.
Note Do not turn OFF the power while a message is being displayed in
any saving or loading operations. Data in memory may be de-
stroyed, and the V530-R150 may not operate correctly the next
time it is started.
Saving Data to a Personal Computer (V530-R150
→
Personal Computer)
Procedure
1
Connect the COM1 port on the computer and the
V530-R150 using an RS-232 cable.
2
Make the V530-R150 communication settings.
The default communication settings are as shown in the fol-
lowing table. These settings can be normally used.