6-2
Section
SET (Setting) Mode
100
Display Settings
Sets the items to be displayed on the screen in MON (monitor)
and RUN modes. The processing time becomes longer if more
items are selected.
Display Settings
Read QRCode
Reading Data
Detail Data
Finder Pattern
Cell Position
Font Size
1
Select whether or not to display reading data for QR Codes
on the screen. (The default setting is ON.)
2
Select whether or not to display detailed data of QR Codes
on the screen. (The default setting is OFF.)
If turned ON, information such as detailed information about
codes and pixels per cell, etc. is displayed.
3
Select whether or not to display finder pattern positions of
QR Codes on the screen. (The default setting is OFF.)
4
Select whether or not to display cell recognition positions of
QR Codes on the screen. (The default setting is OFF.)
Note When
Read QRCode/Function Settings/Cell
Verify is set to ON, this function is invalid.
5
Select the font size of reading data to be displayed on the
screen. (x1/x4; Default setting is x1.)
When the displayed data exceeds the number of letters giv-
en below, the font size is automatically set to x1.
•
64 or more letters
(x4 when reading accuracy or data history function is ON.)
Data other than reading data (detailed data etc.) is dis-
played with x1 font size regardless of this setting.