83
V400-R1CF/R1CS
User’s Manual
Section
4
Menu Sheet/Command
L
ist
Section 4
Setting Method
Number of digit output
Whether to output the number of digits to the data output format is specified.
This setting item can be registered as 1 digit of the header and is added to a location
determined by the order of registration.
Two-byte characters are handled as 2 characters in 2D codes.
Set “Clear the header (PR)” to clear the number of digit output.
E.g.: The following describes the steps for setting the number of digit output.
Menu sheet
Command
Number of digit output
(Bar code: 2 digits, 2D code: 6 digits)
_$3_
$3
Number of digit output
(Bar code and 2D code: 6 digits)
_$6_
$6
Setting start (ZZ)
Set the headers collectively (RY)
Output the number of digits ($3)
Setting end (ZZ)