29
V400-R1CF/R1CS
User’s Manual
Section
2
Wiring and
Connection
Section 2
Introduction Procedure
Wiring and Connection
This section explains the pin arrangement, the input/output circuit, and the method of
connection to upper equipment.
Pin arrangement and input/output circuit
Pin arrangement
Connection with upper equipment p.31, p.32
When you make a connection cable, use the following connectors.
Recommended parts for the connector
Wire color Pin No. Signal name
Function
Signal direction
Reader
Upper equipment
Green
1
SD
Transmission data
White
2
RD
Received data
Blue
3
RS
Transmission request
Gray
4
CS
Transmission allowed
Brown
5
TRIG
External trigger signal
-
6
NC
Not connected
Black
7
S.GND
0 V
External
Red
8
VCC
Power supply
External
Yellow
- (Note)
OK
READ OK output
External
Orange
- (Note)
NG
READ NG output
External
Usage
Manufacturer
Model
For cable relay
Hosiden Corporation
TCS8587-0170477
For panel installation
Hosiden Corporation
TCS1080-0120177
The OK and NG output lines are not connected to the DIN 8-pin connector. To use the OK and NG
outputs, cut the cables.
(Pin alignment)
Connector part (DIN: 8P plug)
Made by Hosiden Corporation
TCP1394-715267 (Type A)