![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h/sysmac-c200h_operation-manual_742423079.webp)
66
Initial I/O Table Registration
Register I/O table
Memory cleared completely
00000
00000
FUN (??)
00000I/OTBL?
?Ć?U=
00000I/OTBL WRIT
????
00000I/OTBL WRIT
9713
00000I/OTBL WRIT
OK
4-5-5
Clearing Error Messages
After the I/O table has been registered, any error messages recorded in
memory should be cleared. It is assumed here that the causes of any of the
errors for which error messages appear have already been taken care of. If
the beeper sounds when an attempt is made to clear an error message,
eliminate the cause of the error, and then clear the error message (refer to
Section 8 Troubleshooting).
To display any recorded error messages, press CLR, FUN, and then
MONTR. The first message will appear. Pressing MONTR again will clear the
present message and display the next error message. Continue pressing
MONTR until all messages have been cleared.
Although error messages can be accessed in any mode, they can be cleared
only in PROGRAM mode.
Key Sequence
4-5-6
Verifying the I/O Table
The I/O Table Verification operation is used to check the I/O table registered
in memory to see if it matches the actual sequence of I/O Units mounted.
The first inconsistency discovered will be displayed as shown below. Every
subsequent pressing of VER displays the next inconsistency.
Key Sequence
Preparation for Operation
Section 4-5
Summary of Contents for SYSMAC C200H
