Communication protocols
PROGRAMMING MANUAL
233
R
e
vi
si
o
n
1
.0
To configure a TPDO, execute the command
CAN_CORT(unit,8,PDO_number,area_type,start_address,COB_ID,
inhibit_time,event_timer,obj_type, obj_type,...)
4. The write operations defined with the command
CAN_CORT(unit,9,node_ID,index,subindex,byte1,byte2,...)
are
executed at each network startup. Note the following:
•
Execute this command for each CANopen object that must be
configured.
•
Do the configuration for the TJ1-CORT first, before the configuration
of the CANopen slaves.
•
Group the configuration commands for the CANopen slaves together
per node.
•
It is possible that certain non-default settings are required for the
TJ1-CORT or the CANopen slaves in the network. An example is to
initialize the heartbeat consumption and production object entries.
•
It is highly recommended that the TJ1-CORT acts as the heartbeat
consumer for all connected CANopen devices. Otherwise, the
communication status will be incorrect.